Author Topic: Need an engine rebuilder shop  (Read 604 times)

0 Members and 1 Guest are viewing this topic.

Offline rdymond

Need an engine rebuilder shop
« on: July 25, 2017, 03:46:37 PM »
The stock 2013 LS3 from my swap needs a rebuild due to the crank being pulled to the rear of the engine.
Any recommendations for reputable and fair engine builders? I am prepared to ship it somewhere (in Canada) if need be.

Thanks,
Robin.
2002 Boxster S (2B prepped)
2002 Porsche Boxster (2 wife)
2005 Brunton Super Stalker, a 1959 Lotus 7 replica w/ GM L32 V6 3800SC (sold :( )

Calgary Sports Car Club Forum - Hosted by speedracer.ca

Need an engine rebuilder shop
« on: July 25, 2017, 03:46:37 PM »

Offline PBodyGuy

  • Floating WCMA Resource
  • Arch (Moderator)
  • 7000 RPM
  • *****
  • Posts: 672
  • Total likes: 32
  • Karma: +45/-2
Re: Need an engine rebuilder shop
« Reply #1 on: July 26, 2017, 06:15:18 AM »
I strongly recommend *against* D&W; they promised a 2 week turnaround on some head work and delivered nothing after 8 months.

Chris
Mystery Spec Miata #44
...a couple other things ;)

Offline lophilip

Re: Need an engine rebuilder shop
« Reply #2 on: August 06, 2017, 02:16:17 PM »
Davenport (is that the correct spelling?) might be a first point of contact.

Offline midnightsky

Re: Need an engine rebuilder shop
« Reply #3 on: August 06, 2017, 08:28:27 PM »
Davenport (is that the correct spelling?) might be a first point of contact.

i have heard negative things about them, especially with overcharging for their work.
1995 Toyota Celica GT SOLD
1995 Acura Integra RS SOLD
2002 Acura RSX Base SOLD
1995 Subaru STi Type RA SOLD
2004 Honda Accord 2.4L SOLD
2017 Mazda 3 Hatch 2.5L Winters Moonlight

Offline Mattp

Re: Need an engine rebuilder shop
« Reply #4 on: August 06, 2017, 09:03:15 PM »
I have an ex-prodrive engine builder here in Canada who has started offering rebuilds, PM me if you would like more details.
stRanger Danger.....

Offline rdymond

Re: Need an engine rebuilder shop
« Reply #5 on: August 21, 2017, 04:29:36 PM »
I have an ex-prodrive engine builder here in Canada who has started offering rebuilds, PM me if you would like more details.
PM'd you.
2002 Boxster S (2B prepped)
2002 Porsche Boxster (2 wife)
2005 Brunton Super Stalker, a 1959 Lotus 7 replica w/ GM L32 V6 3800SC (sold :( )

Calgary Sports Car Club Forum - Hosted by speedracer.ca

Re: Need an engine rebuilder shop
« Reply #5 on: August 21, 2017, 04:29:36 PM »